Temprange:-70℃～+150℃ 2625L thermal cycling and humidity test chamber With observation
windows
Product Overview
Able to accurately simulate a wide range of complicated natural environments, and is suitable for
reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental
testing equipment and test methods for the basic parameters of electric and electronic products under
the condition of humidity, low temperature, high temperature, and constant heat and damp
Product Application
Suitable for electrical, electronics, machinery and other products, parts, materials, etc. under high or low
temperature, simulating temperature humidity change conditions on the products, parts, materials quality
and reliability testing.
Product Specifications
| Temp. Range | -70℃ ～ +150℃ | | Temp. Deviation | ≦±2.0℃ | | Temp. Uniformity | ±2.0℃ | | Temp. Fluctuation | ±0.5℃ | | Heating Rate | From -70℃ to +150℃, linear, ≧200℃/h, with load, No Heat Emission | | Cooling Rate | From +150℃ to -70℃, linear, ≧200℃/h, with load, No Heat Emission | | Humidity range | 30%R.H～85%R.H | | Temperature humidity control range | | | Humidity Deviation | ±3.0％RH(＞75％RH) ±5.0％RH(≤75％RH) | | Humidity Uniformity | ±3.0％RH (no load) | | Humidity Fluctuation | ±2.0％RH | | Load | 2-3 PV Modules to be loaded in a vertical orientation. Single panel max. size of 2000*1000*50mm. Total weight of 60-90KG. | | The above specifications is measured in the environment of + 25 ℃, temperature and humidity performance measurement comply with related regulation of IEC60068-3 standard; Sensors placed in the air outlet. | | Body Structure | | Overall structure, the chamber consists of three parts: Insulation chamber body, separate refrigerating unit and electric control cabinet. | | Interior size | W 700 × H 1500 × D 2500 mm, inner volume: 2625L | | External Size | Approx. W 2000 × H 1900 × D 3380 mm, (not including the machine protruding part, like the controller ) | | External material | High-quality carbon stainless steel plate, the surface for electrostatic color spray treatment | | Interior material | stainless steel (SUS # 304) | | Insulation material | Rigid polyurethane foam + glass wool. Insulation panels is connected with eccentric hook | | Door | Left open door, door size of W700*H1500mm, With observation windows W400*H400 mm, | | Cable hole | Open total 1 cable hole of φ100mm, on the left side of the chamber, Equipped with rubber isolation plugs and plastic cover. | | Lighting lamp | 11W/AC220V, 1 ea, located on the observation window | | Power distribution control cabinet | Total power circuit breaker, over-temperature protection, and emergency power off button. | | Water-supplying system | Water pump supplying water automatically | | R.O. Purifier | R.O. Purifier, 1 ea, end user provide tap water source of 1~2kg/cm2 | | Heating | High-quality nickel-chromium alloy wire heater, non-contact control mode (SSR) | | Humidifying | Stainless steel corrosion-resistant electric evaporative humidification. | | Humidity sensor | Electronic humidity sensor, no need to replace the damp cloth. | | Condensate drainage holes | Equipped with condensed water and condensate drainage hole for test space and refrigeration unit. | | Pressure Equalizations Port | Test chamber with one pressure equalization port, ensuring the inside and outside pressure balance | | Moving Castors | Moving castors ( with feet cup) | | Noise | Less than 75dB, measured 1 meters far from the test chamber | |
Features
● GB-2423. 1-89 (IEC68-2-1)Test A: Low Temperature Test
● GB-2423. 2-89 (IEC68-2-2)Test B: High Temperature Test
● GJB360. 8-87 (MIL-STD. 202F) High Temperature Life Test
● GBJl50. 3 (MIL-STD-810D) High Temperature Test
● GJBl50. 4 (MIL-STD-810D) Low Temperature Test
● GB2423. 3-93(IEC68-2-3)Test Ca: Constant Heat Test
Prouduct Display
Packing and Shipment:
(1).Strong standard wood case, inner plastic films wrapped for temperature and humidity test chamber
(2).Usually we delivery the equipment by air,by sea or by express. it depends on customer.
Our Services
1,Pre-sales service
Before the purchase, our company will provide customers with detailed product-related information, and
welcome you to visit the company and check the goods.
2,After-sales service
After the completion of the transaction, our company will be arranged different after-sales service
according to the ease of the goods , and even arrange work engineers on-site service.
3,Warranty period
Our product warranty is 12 months and we are committed to responding within 48 hours of the problem,
providing a solution.
For more detail information ,kindly contact : annie@komegtech.com whats app ,wechat :+86-
13726402801.
Product Tags:
|
|
2625L Thermal Cycling And Humidity Test Chamber Temp Range -70℃ ～ +150℃ Images
|
