225L High And Low Temperature Test Chamber for car parts
1. Standard for High and Low temperature test chamber
GB11158 Technical conditions for high-temperature testing room
GB10589-89 Technical conditions for low-temperature testing room
GB/T2423.1-2001 testing methods for low-temperature
GB/T2423.2-2001 testing methods for high-temperature
GB/T2423.3-93 technical conditions for humidity testing room
IEC60068-2-1.1990 testing methods for low-temperature
IEC60068-2-2.1974 testing methods for high-temperature
2. Stability Temperature Humidity Test Chamber ClimaticTest Chamber Features:
1).The separation of humidifier circuit from electric circuit improves safety and protects the circuit against the leakage of water supply line.
2).Available in Chinese and English LCD touch screen, easy operation and program.
3).Able to display the relative date and information of the whole operating system in running mode, graphic display. precautions, maintenance and troubleshooting appear on the screen instantly.
4).The Sirocco fan motor provides greater cyclic airflow to avoid dead corner in the chamber so as to obtain an uniform distribution of temperature and humidity.
5).The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
6).Water Supply adopts automatic watering System, Circulating water supply together with water filter.
3. Specifications:
KMH-L series
| Model | KMT series |
| 150 L | 225 L | 408 L | 800 L | 1000 L |
| Temp. range | -20°C ~180°C, -40°C ~180°C, -70°C ~180°C for option |
| Interior size | W(mm) | 600 | 700 | 700 | 1000 | 1000 |
| H(mm) | 600 | 700 | 750 | 1000 | 1000 |
| D(mm) | 460 | 480 | 800 | 800 | 1000 |
| Exterior size | W(mm) | 880 | 980 | 980 | 1280 | 1280 |
| H(mm) | 1730 | 1890 | 1940 | 2160 | 2160 |
| D(mm) | 1400 | 1460 | 1740 | 1750 | 1950 |
| Power(KW) | 5.8 | 6 | 7.5 | 12.8 | 12.8 |
| Weight(KG) | 250 | 300 | 420 | 530 | 600 |
| Temp. uniformity | ±2.0ºC | |
| Heat up time | -40°C ~+100°C ,within 45 min |
| Pull down time | +20°C ~-40°C , within 60 min |
| Temp. constancy | ±0.5ºC |
| Safety device (standard) | NFB, over pressure,over heat and over current protection for compressor, Over temp. protect, over load protect of blower, dry heat protection |
| Warranty | 12 months basiclly, and 24 months for choose |
| Interior material | Stainless Steel Plate(SUS 304) |
| Exterior material | Baked Painting Steel Or Stainless steel(SUS304) |
| Insulation material | Rigid polyurethane Foam and Glass Fiber Wool |
| Ambient Temp. | +5°C ~+35°C |
| Wiring method | AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires |
| Controller | LCD Touch Screen, Chinese or English display selectable |
| Operation model :Program or fix point running |
| Memory capacity :120programs,1200steps, |
All repeat 999 cycles, part repeat 99 cycles
|
4. Temperature and Humidity Test Capabilities
KOMEG have a variety of temperature and humidity chambers from small to walk-in chambers that can reproduce a wide range of climatic conditions incluiding high and low temperature as well as combined temperature and humidity conditions. KOMEG also support a climatic test facility dedicated to tests against requirements for telecoms and radio products.
5. Details of the chambers
6.Parts and brands
7.Trade show:
8. Package
Other series for choose:
Programmable Temperature & humidity testing Chamber
Air Thermal Shock Tester
Thermal Shock Tester
Rapid temperature change chamber/ ESS
Salt Spray Tester
Walk In environmental Testing Chamber
Drive in environmental Testing Chamber
Temperature & humidity & Vibration Combined Testing Chamber
Aging Oven Tester
Rain/Spray Testing Chamber
Burn-in testing equipment
Vibration Tester
Precision Oven Tester, etc.
Product Tags:
|
|
225L High And Low Temperature Test Chamber For Car Parts And Electronic Accessories Images
|
