Touch Screen Temperature Humidity Controlled Cabinets Reliability Testing Different Size
Description :
Able to accurately simulate a wide range of complicated natural environments, and is suitable for reliability
test in industrial products.
Technical Specification
Different size and temperature range ,humidity range can be according to your requirements .
| Model | KMH- |
| 36 | 64 | 80 | 100 | 150 | 225 | 408 | 800 | 1000 | 1300 |
| Working Chamber Volume (litter | 36L | 64L | 80L | 100L | 150L | 225L | 408L | 800L | 1000L | 1300L |
| Interior size (WXH XD cm) | 30 | 40 | 50 | 40 | 60 | 70 | 70 | 100 | 100 | 100 |
| 40 | 40 | 50 | 50 | 40 | 70 | 75 | 100 | 100 | 100 |
| 30 | 40 | 40 | 50 | 46 | 48 | 80 | 80 | 100 | 130 |
| Temperature range | ,R: -20ºC~ +150 ℃ L :-40ºC~ +150 ℃ S: -70ºC~ +150 ℃ (can be make as your requirements) |
| Temp Deviation | ≦ ± 2.0℃ |
| Temp Fluctuation | ±0.5℃ |
| Heat up rate | Heating up rate:from -20℃ ↑ +80℃ Nonlinear 2℃min no load |
| Humidity range | 10%R.H～98%R.H |
| Cooling rate | Cooling rate:from +80℃ down to -20℃ Nonlinear 3℃min no load |
| Chamber size | Interior size: W 1280 × H 1000× D 1000 mm |
| Load | Product calorific value 1000w |
| Insulation box | Wall material: high-quality carbon steel nner wall material: SUS304 # matte stainless steel plate Insulation materials: rigid polyurethane foam insulation layer + glass fiber. |
Other specification
| Door | Single door, left open. Heating wire was installed at the door frames to prevent condensation at low temperatures. |
| Water outlet hole | Available for drain the condensate water |
| Lighting device | LED Lighting device *1 located on observation window |
| Heater | High quality nickel-chromium alloy wire electric heaters, Non-contact control mode(SSR) |
| Condensate drain hole | With workroom condensate and condensate drain. |
| Cable port | Φ50mm*1 located on each side of chamber, with rubber stopper and stainless steel cover |
| Shelf for samples | stainless steel sample holder 8pcs,Adjustable, load capacity 30kg/ layer |
Application :
It is suitable for tests the products of electrical, electronic, mechanical and other products, parts and
materials under the conditions of high and low temperature and high temperature and humidity. For quality
and reliability test of simulating temperature and humidity changes in electrical, electronic, mechanical and
other products, parts and materials.
Feathers
● GB-2423.1-2008 (IEC68-2-1)Test A: Low Temperature Test
● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test
● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test
● GJBl50.3-2009(MIL-STD-810D) High Temperature Test
● GJBl50.4-2009 (MIL-STD-810D) Low Temperature Test
● GB2423.3-2008(IEC68-2-3)Test Ca: Constant Heat Test
● GB2423.4-2008(IEC68-2—30) Test Db: Damp Heat Alternative Test
● GJBl50.9-2009 (MIL-STD-810D) Damp Heat Test
Photos show
Product Tags:
|
|
Touch Screen Temperature Humidity Controlled Cabinets Reliability Testing Different Size Images
|
